Re: [dvd::rip] Pass 2 using "Xvid 3" fails...

[Tim Schoenfelder <tim@xxxxxxxxxxxxxxxxxxx>]

Mark Rose wrote:

> Usually when you get a message like 
>
>  
>
> > [transcode] critical: failed to init encoder
> >    
>
> it means the encoder is not installed. Try reinstalling the encoders?
>
>  
Thanks Mark,

Perhaps I haven't installed the correct RPMs (I'm on RedHat V8.0) since 
it isn't seeing these other codecs.  Could anyone recommend any encoder 
rpms?

Tim Schoenfelder

> Mark
>
> On Mon, 2004-01-05 at 18:32, Tim Schoenfelder wrote:
>  
>
> > I selected all the titles and read them in.  I've then tried to 
> > transcode with the following results:
> >
> > Pass 1 appears to work great.  However, pass 2 prints the following:
> >
> > Job 'Transcoding video - title #1, pass 2' failed.
> >
> > Executed command: mkdir -m 0775 -p '/mnt/i/CharliesAngels/tmp' && cd 
> > /mnt/i/CharliesAngels/tmp && dr_exec transcode -H 10 -a 0 -x vob -i 
> > /mnt/i/CharliesAngels/vob/001 -w 847 -b 128,0,0 -s 1.080 --a52_drc_off 
> > -V  -f 24,1 -Y 4,0,4,0 -B 15,10,8 -R 2 -y xvid3 -o 
> > /mnt/i/CharliesAngels/avi/001/CharliesAngels-001.avi --print_status 20 
> > && echo DVDRIP_SUCCESS
> >
> > Last output was:
> >
> >
> > transcode v0.6.11 (C) 2001-2003 Thomas Oestreich, 2003 T. Bitterberg
> > libdvdread: Using libdvdcss version 1.2.8 for DVD access
> > libdvdread: Couldn't find device name.
> > libdvdread: Can't open file VIDEO_TS.IFO.
> > [import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio) 
> > MPEG/AC3/PCM | (subtitle)
> > [export_xvid3.so] v0.3.12 (2003-07-30) (video) XviD nonumber series (aka 
> > API 3.0)  | (audio) MPEG/AC3/PCM
> > No accelerated IMDCT transform found
> > No ./xvid3.cfg nor ~/.transcode/xvid3.cfg file found, falling back to 
> > hardcoded defaults
> > Audio: using new version
> > Audio: using lame-3.87 (beta 1, Dec 12 2003) (static)
> >
> > Anyone know what might be wrong?
> >
> >
> > I get a similiar error when attempting the 1st pass of Divx4 or Divx5 as 
> > follows(Divx5 error):
> >
> > Job 'Transcoding video - title #1, pass 1' failed.
> >
> > Executed command: mkdir -m 0775 -p '/mnt/i/CharliesAngels/tmp' && cd 
> > /mnt/i/CharliesAngels/tmp && dr_exec transcode -H 10 -a 0 -x vob -i 
> > /mnt/i/CharliesAngels/vob/001 -w 847 -b 128,0,0 -s 1.080 --a52_drc_off 
> > -V  -f 24,1 -Y 4,0,4,0 -B 15,10,8 -R 1 -y divx5,null -o /dev/null 
> > --print_status 20 && echo DVDRIP_SUCCESS
> >
> > Last output was:
> >
> >
> > transcode v0.6.11 (C) 2001-2003 Thomas Oestreich, 2003 T. Bitterberg
> > libdvdread: Using libdvdcss version 1.2.8 for DVD access
> > libdvdread: Couldn't find device name.
> > libdvdread: Can't open file VIDEO_TS.IFO.
> > [import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio) 
> > MPEG/AC3/PCM | (subtitle)
> > [export_null.so] v0.1.2 (2001-08-17) (video) null | (audio) null
> > [export_divx5.so] v0.1.8 (2003-07-24) (video) DivX 5.xx | (audio) 
> > MPEG/AC3/PCM
> > No accelerated IMDCT transform found
> > [transcode] warning : API in encore.h is not compatible with installed 
> > lbdivxencore library
> > [transcode] (probe) suggested AV correction -D 0 (0 ms) | AV 0 ms | 0 ms
> > [transcode] auto-probing source /mnt/i/CharliesAngels/vob/001 (ok)
> > [transcode] V: import format    | MPEG-2  (V=vob|A=vob)
> > [transcode] V: AV demux/sync    | (2) initial MPEG sequence / enforce 
> > frame rate
> > [transcode] V: import frame     | 720x480  1.50:1  encoded @ 16:9
> > [transcode] V: new aspect ratio | 640x360  1.78:1 (-B)
> > [transcode] V: clip frame (->)  | 640x352
> > [transcode] V: bits/pixel       | 0.157
> > [transcode] V: decoding fps,frc | 23.976,1
> > [transcode] V: multi-pass       | (mode=1) writing data (pass 1) to 
> > divx4.log
> > [transcode] V: Y'CbCr           | YV12/I420
> > [transcode] A: import format    | 0x2001  AC3/A52      [48000,16,2]  192 
> > kbps
> > [transcode] A: export           | disabled
> > [transcode] V: encoding fps,frc | 23.976,1
> > [transcode] A: bytes per frame  | 8008 (8008.000000)
> > [transcode] A: adjustment       | 0@1000
> > [transcode] A: rescale stream   | 1.080
> > [transcode] V: IA32 accel mode  | sse (sse mmxext mmx asm)
> > [transcode] V: video buffer     | 10 @ 720x480
> > [import_vob.so] tccat -i "/mnt/i/CharliesAngels/vob/001" -t vob -d 0 -S 
> > 0 | tcdemux -a 0 -x ac3 -S 0 -M 2 -d 0 | tcextract -t vob -a 0 -x ac3 -d 
> > 0 | tcdecode -x a52 -d 0 -A 1
> > [import_vob.so] tccat -i "/mnt/i/CharliesAngels/vob/001" -t vob -d 0 -S 
> > 0 | tcdemux -s 0x80 -x mpeg2 -S 0 -M 2 -f 23.976024 -P /tmp/filem23004   
> > -d 0 | tcextract -t vob -a 0 -x mpeg2 -d 0 | tcdecode -x mpeg2 -d 0 -y yv12
> > [transcode] warning : (encoder.c) video export module error: init failed
> > [transcode] critical: failed to init encoder
> >
> > Xvid 4 fails on the first pass also.
> >
> > Drive i on this PC is a 20GB Linux Partition..  MPlayer is the only 
> > dependency not satisfied.
> >
> > Tim Schoenfelder
> >
> > ____________________________________________________
> > http://lists.exit1.org/mailman/listinfo/dvdrip-users
> > How To Ask Questions The Smart Way:
> > http://catb.org/~esr/faqs/smart-questions.html
> >
> >
> >    
>
> ____________________________________________________
> http://lists.exit1.org/mailman/listinfo/dvdrip-users
> How To Ask Questions The Smart Way:
> http://catb.org/~esr/faqs/smart-questions.html
>  


____________________________________________________
http://lists.exit1.org/mailman/listinfo/dvdrip-users
How To Ask Questions The Smart Way:
http://catb.org/~esr/faqs/smart-questions.html