Greetings!
I'm having a problem getting dvd::rip working. At one point, everything was
working just fine, but I since a component was updated a few months ago
(using yum) I have not been able rip since. Although I'm not able to
identify when / why things broke, even a wipe and re-install of my system
hasn't been able to restore things to a working state.
Here are the symptoms:
I can read the DVD table of contents and it appears to rip a track
successfully, however, the system spins for about 10 minutes on "Grabbing
preview" ... until finally it reports "transcode can't find this frame. Try
forcing slow frame grabbing". Slow frame grabbing results in the same
problem / message.
{{ -- SNIP -- }}
Fri Nov 4 21:40:28 2005 Starting job (1): Ripping - title #1 Fri Nov 4
21:40:28 2005 Executing command: rm -f /root/rip/night/vob/001/night-???.vob
&& dr_exec tccat -t dvd -T 1,-1,1 -i //dev/hdc | dr_splitpipe -f
/root/rip/night/tmp/night-001-nav.log 1024 /root/rip/night/vob/001/night vob
| tcextract -a 0 -x ac3 -t vob | tcdecode -x ac3 | tcscan -x pcm && echo
DVDRIP_SUCCESS Fri Nov 4 21:40:29 2005 Job has PID 32308 Fri Nov 4 21:41:54
2005 Ripping - title #1: 10 percent done.
Fri Nov 4 21:42:58 2005 Ripping - title #1: 20 percent done.
Fri Nov 4 21:43:54 2005 Ripping - title #1: 30 percent done.
Fri Nov 4 21:44:47 2005 Ripping - title #1: 40 percent done.
Fri Nov 4 21:45:37 2005 Ripping - title #1: 50 percent done.
Fri Nov 4 21:46:25 2005 Ripping - title #1: 60 percent done.
Fri Nov 4 21:47:11 2005 Ripping - title #1: 70 percent done.
Fri Nov 4 21:47:56 2005 Ripping - title #1: 80 percent done.
Fri Nov 4 21:48:42 2005 Ripping - title #1: 90 percent done.
Fri Nov 4 21:49:27 2005 Executing command: dr_exec tcprobe -H 25 -i
/root/rip/night/vob/001 && echo DVDRIP_SUCCESS Fri Nov 4 21:49:37 2005
Program stream units calculated Fri Nov 4 21:49:37 2005 Enabled PSU core.
Movie is NTSC and has more than one PSU.
Fri Nov 4 21:49:37 2005 Successfully finished job (1): Ripping - title #1
Fri Nov 4 21:49:37 2005 This task needs about 0 MB, 9775 MB are free.
Fri Nov 4 21:49:37 2005 Starting job (1): Grabbing preview - title #1 ,frame
#55184 Fri Nov 4 21:49:38 2005 Executing command: mkdir -m 0775
/tmp/dvdrip32169.ppm; cd /tmp/dvdrip32169.ppm; dr_exec transcode -H 10 -o
snapshot -y ppm,null -x vob,null -i /root/rip/night/vob/001 -c 7-8 -L 963125
&& dr_exec convert -size 704x480 /tmp/dvdrip32169.ppm/snapshot*.ppm
/root/rip/night/tmp/night-001-preview-orig.jpg && dr_exec convert -size
704x480 /tmp/dvdrip32169.ppm/snapshot*.ppm
gray:/root/rip/night/tmp/night-001-preview-orig.raw && rm -r
/tmp/dvdrip32169.ppm && echo DVDRIP_SUCCESS Fri Nov 4 21:49:38 2005 Project
file saved to '/root/rip/night/tmp/backup.rip'
Fri Nov 4 21:49:38 2005 Job has PID 32528 Fri Nov 4 21:52:54 2005 Aborting
command. Sending signal 1 to PID 32528...
Fri Nov 4 21:52:55 2005 Aborting job: Grabbing preview - title #1 ,frame
#55184
{{ -- SNIP -- }}
When I try to then transcode the video, it again spins the disk on
"Transcoding video - title #1, pass 1: Initialzing":
{{ -- SNIP -- }}
Job 'Transcoding video - title #1, pass 2' failed.
Executed command: mkdir -m 0775 -p '/root/rip/night/tmp' && cd
/root/rip/night/tmp && dr_exec transcode -H 10 -a 0 -x vob -i
/root/rip/night/vob/001 -w 2411,50 -F mpeg4 -b 128,0,0 --a52_drc_off -f 24,1
-M 2 -R 2 -y ffmpeg --psu_mode --nav_seek
/root/rip/night/tmp/night-001-nav.log --no_split -o
/root/rip/night/avi/001/night-001.avi --print_status 20 && echo
DVDRIP_SUCCESS
Last output was:
transcode v0.6.14 (C) 2001-2003 Thomas Oestreich, 2003-2004 T. Bitterberg
tc_memcpy: using mmxext for memcpy
[import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio) MPEG/AC3/PCM |
(subtitle) [export_ffmpeg.so] v0.3.13 (2004-08-03) (video)
FFmpeg0.4.9-pre1b4730 | (audio) MPEG/AC3/PCM [export_ffmpeg.so] Using FFMPEG
codec 'mpeg4' (FourCC 'DIVX', MPEG4 compliant video).
[export_ffmpeg.so]: WARNING: Interlacing parameters unknown, use
--encode_fields
[export_ffmpeg.so]: INFO: No profile selected [export_ffmpeg.so] Neither
'./ffmpeg.cfg' nor '~/.transcode/ffmpeg.cfg'
[export_ffmpeg.so] found. Default settings will be used instead.
[export_ffmpeg.so]: INFO: Starting 1 thread(s)
[export_ffmpeg.so]: INFO: Set display aspect ratio to input
[export_ffmpeg.so] Could not read the complete 2pass log file "divx4.log".
[transcode] warning : (encoder.c) video export module error: init failed
[transcode] (probe) suggested AV correction -D 0 (0 ms) | AV 0 ms | 0 ms
[transcode] auto-probing source /root/rip/night/vob/001 (ok)
[transcode] V: import format | MPEG-2 (V=vob|A=vob)
[transcode] V: AV demux/sync | (2) initial MPEG sequence / enforce frame
rate
[transcode] V: import frame | 720x480 1.50:1 encoded @ 4:3
[transcode] V: bits/pixel | 0.291
[transcode] V: decoding fps,frc | 23.976,1
[transcode] V: multi-pass | (mode=2) reading data (pass2) from divx4.log
[transcode] V: Y'CbCr | YV12/I420
[transcode] A: import format | 0x2000 AC3 [48000,16,2]
[transcode] A: export format | 0x55 MPEG layer-3 [48000,16,2] 128 kbps
[transcode] V: encoding fps,frc | 23.976,1 [transcode] A: bytes per frame |
8008 (8008.000000)
[transcode] A: adjustment | 0@1000
[transcode] V: IA32 accel mode | sse (sse mmxext mmx asm C)
[transcode] V: video buffer | 10 @ 720x480
[transcode] critical: failed to init encoder {{ -- SNIP -- }}
I'm running Fedora Core 4 (Linux 2.6.13-1.1532_FC4 #1 Thu Oct 20 01:30:08
EDT 2005 i686 i686 i386 GNU/Linux)
Here are the relevant component lists:
perl-Video-DVDRip 0.52.6-1.2.fc4
libdvdcss 1.2.9-1.2.fc4
libdvdread 0.9.4-8cvs.2.fc4
mjpegtools 1.6.3-0.2.rc2.2.fc4
ogmtools 1.5-1.2.fc4
subtitleripper 0.3.4-2.2.fc4
transcode 1.0.0-2.2.fc4
(I've also tried transcode 0.6.14-1.1.fc3 with the same results)
I've tried the LD_ASSUME_KERNEL=2.2.5 NPTL workaround ... with the same
results.
For devices, I'm using /dev/hdc as the DVD device and /media/cdrom as the
mount point.
I've seen similar posts about the frame grabbing issue, but no resolutions.
Any help would be GREATLY appreciated ...
Thanks!
- Pete
|
DOCUMENTATION
TABLE OF CONTENTS