Hi .
run Environment :
Program Version
-------------------------------
kernel 2.6.12
dvd::rip 0.97.10
transcode 1.0.2
ImageMagick 6.2.4
xvid4conf 1.12
subtitle2pgm 0.4
lsdvd 0.15
rar 2.90
mplayer not installed
ogmtools 1.5
dvdxchap 1.5
mjpegtools 1.8.0
cdrdao 1.2.0
vcdimager 0.7.23
mkisofs 2.01.01
cdrecord 2.01.01
dvdrecord 0.2.1
xine 0.99.4
fping not installed
-------------------------------
problem:
i succesfully rip a chapter of a dvd to my hard disk ( it does not matter if
it is
a chapter or all the dvd...then the error is the same)
then dvdrip succesfully clip the frames to resize and the volume adjusting
function
when i try to transcode with a single pass then the job immediately ends..
if i try to transcode with two pass ,then the first pass runs fine,but the
second
again immediately ends...so the problem seems to be the final pass.
to further debug i cut and paste the dvdrip log to a linux konsole and i
execute
the job....(see JOBLOG1),then i rerun the job specifying the filename at
the -i
parameter and not only the input directory and all works fine.
please can you help me providing a patch to fix the problem ?
thanks in advance for your help
Maurizio
JOBLOG1
____________________________________________________________________________
___
execflow -n 0 transcode -H 10 -a 0 -x vob -i
/home/bong/tmp/Barry/vob/001-C002/ -w 1364,50 -b 128,0,2 -s
8.135 --a52_drc_off -f 25 -Y 40,4,40,4 -B 10,7,8 -y xvid4 -o
/home/bong/tmp/Barry/avi/001/Barry-001-C002.avi --print_status 20 && echo
EXECFLOW_OK
EXEC_FLOW_JOB_PID=4266
transcode v1.0.2 (C) 2001-2003 Thomas Oestreich, 2003-2004 T. Bitterberg
libdvdread: Using libdvdcss version 1.2.9 for DVD access
libdvdread: Couldn't find device name.
libdvdread: Can't open file VIDEO_TS.IFO.
[transcode] (probe) suggested AV correction -D 0 (0 ms) | AV -15 ms | -15 ms
[transcode] auto-probing source /home/bong/tmp/Barry/vob/001-C002/ (ok)
[transcode] V: import format | MPEG (V=vob|A=ac3)
[transcode] V: AV demux/sync | (0) sync AV at PTS start - demuxer disabled
[transcode] V: import frame | 720x576 1.25:1 encoded @ 4:3
[transcode] V: new aspect ratio | 664x496 1.34:1 (-B)
[transcode] V: clip frame (->) | 656x416
[transcode] V: bits/pixel | 0.200
[transcode] V: decoding fps,frc | 25.000,0
[transcode] V: Y'CbCr | YV12/I420
[transcode] A: import format | 0x2000 AC3 [48000,16,2] 384 kbps
[transcode] A: export format | 0x55 MPEG layer-3 [48000,16,2] 128 kbps
[transcode] V: encoding fps,frc | 25.000,3
[transcode] A: bytes per frame | 7680 (7680.000000)
[transcode] A: adjustment | 0@1000
[transcode] A: rescale stream | 8.135
[transcode] A: AV shift | -15 ms [ 0 (A) | -15 ms ]
[transcode] V: IA32/AMD64 accel | sse (sse mmxext mmx asm C)
tc_memcpy: using sse for memcpy
[transcode] V: video buffer | 10 @ 720x576
[import_ac3.so] v0.3.2 (2002-02-15) (audio) AC3
[import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio) MPEG/AC3/PCM |
(subtitle)
[export_xvid4.so] v0.0.5 (2003-12-05) (video) XviD 1.0.x series (aka API
4.0) | (audio) MPEG/AC3/PCM
[import_ac3.so] AC3->PCM
[import_ac3.so] tcextract -a 0 -i "/home/bong/tmp/Barry/vob/001-C002/" -x
ac3 -d 0 | tcdecode -x ac3 -d 0 -s 1.000000,1.000000,1.000000 -A 1
[import_vob.so] tccat -i "/home/bong/tmp/Barry/vob/001-C002/" -t vob -d 0 -S
0 | tcdemux -s 0x80 -x mpeg2 -S 0 -M 0 -d 0 | tcextract -t vob -a 0 -x
mpeg2 -d 0 | tcdecode -x mpeg2 -d 0 -y yv12
tc_memcpy: using sse for memcpy
[fileinfo.c:118] file read error: Is a directory
(extract_ac3.c) no file type specified, assuming RAW stream
[export_xvid4.so] Neither './xvid4.cfg' nor '~/.transcode/xvid4.cfg'
[export_xvid4.so] found. Default settings will be used instead.
Audio: using new version
Audio: using lame-3.96.1
tc_memcpy: using sse for memcpy
(extract_mpeg2.c) missing start code at 0xfffc3b5c
[decode_mpeg2.c] libmpeg2 0.4.0b loop decoder
[decode_mpeg2.c] libmpeg2 acceleration: mmxext
sh: line 1: 4277 Broken pipe tccat -i
"/home/bong/tmp/Barry/vob/001-C002/" -t vob -d 0 -S 0
4278 | tcdemux -s 0x80 -x mpeg2 -S 0 -M 0 -d 0
4279 | tcextract -t vob -a 0 -x mpeg2 -d 0
4280 | tcdecode -x mpeg2 -d 0 -y yv12
clean up | frame threads | unload modules | cancel signal | internal threads
| done
[transcode] encoded 0 frames (0 dropped, 0 cloned), clip length 0.00 s
EXECFLOW_OK
[root@localhost bong]#
JOBLOG2:
_________________________________________________________
mp/Barry/vob/001-C002/Barry-001.vob -w 1364,50 -b 128,0,2 -s
8.135 --a52_drc_off -f 25 -Y 40,4,40,4 -B 10,7,8 -y xvid4 -o
/home/bong/tmp/Barry/avi/001/Barry-001-C002.avi --print_status 20 && echo
EXECFLOW_OK
EXEC_FLOW_JOB_PID=4336
transcode v1.0.2 (C) 2001-2003 Thomas Oestreich, 2003-2004 T. Bitterberg
libdvdread: Using libdvdcss version 1.2.9 for DVD access
libdvdread: Can't open file VIDEO_TS.IFO.
[transcode] (probe) suggested AV correction -D 0 (0 ms) | AV -15 ms | -15 ms
[transcode] auto-probing source
/home/bong/tmp/Barry/vob/001-C002/Barry-001.vob (ok)
[transcode] V: import format | MPEG (V=vob|A=ac3)
[transcode] V: AV demux/sync | (0) sync AV at PTS start - demuxer disabled
[transcode] V: import frame | 720x576 1.25:1 encoded @ 4:3
[transcode] V: new aspect ratio | 664x496 1.34:1 (-B)
[transcode] V: clip frame (->) | 656x416
[transcode] V: bits/pixel | 0.200
[transcode] V: decoding fps,frc | 25.000,0
[transcode] V: Y'CbCr | YV12/I420
[transcode] A: import format | 0x2000 AC3 [48000,16,2] 384 kbps
[transcode] A: export format | 0x55 MPEG layer-3 [48000,16,2] 128 kbps
[transcode] V: encoding fps,frc | 25.000,3
[transcode] A: bytes per frame | 7680 (7680.000000)
[transcode] A: adjustment | 0@1000
[transcode] A: rescale stream | 8.135
[transcode] A: AV shift | -15 ms [ 0 (A) | -15 ms ]
[transcode] V: IA32/AMD64 accel | sse (sse mmxext mmx asm C)
tc_memcpy: using sse for memcpy
[transcode] V: video buffer | 10 @ 720x576
[import_ac3.so] v0.3.2 (2002-02-15) (audio) AC3
[import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio) MPEG/AC3/PCM |
(subtitle)
[export_xvid4.so] v0.0.5 (2003-12-05) (video) XviD 1.0.x series (aka API
4.0) | (audio) MPEG/AC3/PCM
[import_ac3.so] AC3->PCM
[import_ac3.so] tcextract -a 0 -i
"/home/bong/tmp/Barry/vob/001-C002/Barry-001.vob" -x ac3 -d 0 | tcdecode -x
ac3 -d 0 -s 1.000000,1.000000,1.000000 -A 1
[import_vob.so] tccat -i
"/home/bong/tmp/Barry/vob/001-C002/Barry-001.vob" -t vob -d 0 -S 0 |
tcdemux -s 0x80 -x mpeg2 -S 0 -M 0 -d 0 | tcextract -t vob -a 0 -x mpeg2 -d
0 | tcdecode -x mpeg2 -d 0 -y yv12
tc_memcpy: using sse for memcpy
tc_memcpy: using sse for memcpy
[export_xvid4.so] Neither './xvid4.cfg' nor '~/.transcode/xvid4.cfg'
[export_xvid4.so] found. Default settings will be used instead.
Audio: using new version
Audio: using lame-3.96.1
(extract_mpeg2.c) missing start code at 0xfffc3b5c
[decode_mpeg2.c] libmpeg2 0.4.0b loop decoder
[decode_mpeg2.c] libmpeg2 acceleration: mmxext
[encoder.c] Delaying audio (0)
encoding frames [000000-001640], 5.00 fps, EMT: 0:01:05, ( 0| 0| 0)
clean up | frame threads | unload modules | cancel signal | internal threads
| done
[transcode] encoded 1641 frames (0 dropped, 0 cloned), clip length 65.64 s
EXECFLOW_OK
[root@localhost bong]#
____________________________________________________________________________
_______
|
DOCUMENTATION
TABLE OF CONTENTS